GPS Vehicle Tracking
Specification
Vehicle tracker device “WP-20C/30C” is a new remote vehicle security system with a host of comfort features. The “WP-20C/30C” enables you to communicate directly with your vehicle. Locate and/or immobilize the vehicle in real-time if the vehicle is lost or robbed.
The possibility to interact with the system by means of short text message (SMS) gives the owner total management of the events concerning their vehicle. i.e., it can also arm, disarm, speak to the car, and cut off fuel and ignition connection.
Hardware Description
- Power Requirement: 8V to 40V
- Normal operation temperature: -30°C to +80°C
- Restricted operation temperature: Above -40°C and below +85°C
- Storage temperature: -45°C to +90°C
LED Indications
GREEN – Blinks at interval of around 3 seconds once the unit acquires a cellular (GSM) signal. If this light is continuously blinking, check for proper installation of the VTS and ensure GPRS data is active.
YELLOW – Turns solid once the unit acquires a GPS signal. If this light is not blinking, verify proper VTS mounting and that the “SKY VIEWING” is facing the sky.
Note: When the VTS is installed, it can take up to 20 minutes for the GPS to acquire its position after initial power-up.
BLUE – Blinks once the device starts sending data to server.
RED – Power indication.
Note: After all of the lights are solid, turn the vehicle off, then turn it back on and verify the installation.
